Tag: TLS certificates

Posted on

How to get a 100% score on SSL Labs (Nginx, Let’s Encrypt)

This post should be titled “How to get a 100% score on SSL Labs (Nginx, Let’s Encrypt) as of April 2018“, since SSL Labs‘s test evolves all the time (and a good thing it does, too.) But that would be too long a title. 🙂

The challenge:

As we’ve seen before, it’s relatively easy to get an A+ rating on SSL Labs. However, even that configuration will only give a score like this:

Zurgl.com's current SSL Labs score
Zurgl.com’s current SSL Labs score

Certainly more than good enough (and, incidentally, almost certainly much better than whatever home banking site you use…), but your weirdo of a host can’t look at those less-than-100% bars and not see a challenge. 🙂

First, note that all of the following will be just for fun, as the settings to get 100% will demand recent browsers (and, in some cases, recent operating systems/devices), so you probably don’t want this in a world-accessible site. It would be more applicable, say, for a webmail used by you alone, or by half a dozen people. But the point here isn’t real-world use, it’s fun (OK, OK, and learning something new). So, let’s begin.

Getting that perfect SSL Labs score:

For this example, I’ll be using a just-installed Debian 9 server, in which I did something like:

apt -y install nginx
echo "deb http://ftp.debian.org/debian stretch-backports main" >> /etc/apt/sources.list.d/stretch-backports.list # if you don't have this repository active already
apt -y install python-certbot-nginx -t stretch-backports

(The reason for the above extra complexity is the fact that the default certbot in Debian Stretch is too old and tries to authenticate new certificates in an obsolete way, but there’s a newer one in stretch-backports.)

I also created a simple index.html file on /var/www/html/ that just says “Hello world!”. Right now, the site doesn’t even have HTTPS.

So, let’s create a new certificate and configure the HTTPS server in Nginx:

certbot --nginx --rsa-key-size 4096 --no-redirect --staple-ocsp -d mysite.mydomain.com

(replacing mysite.mydomain.com, obviously.)

Testing it on SSL Labs, it gives… exactly the same bars as in the image above, but with an A rating instead of A+. Right, we need HSTS to get A+ (and currently certbot doesn’t support configuring it automatically in Nginx), so we add this to the virtual host’s server section:

add_header Strict-Transport-Security "max-age=63072000; includeSubdomains; preload";

(Note: remove “includeSubDomains;” if you have HTTP sites on any subdomain. Also, HSTS makes your site HTTPS-only, so you can’t use it if you want to keep an HTTP version — in which case you can’t get better than an A rating.)

This upgrades the rating to A+, as expected, but the bars still didn’t change. Let’s make them grow, shall we?

Certificate:

It’s already at 100%, so yay. 🙂

Protocol Support:

Just disable any TLS lower than 1.2. In this case, edit /etc/letsencrypt/options-ssl-nginx.conf and replace the ssl_protocols line (or comment it and add a new one) with:

ssl_protocols TLSv1.2;

WARNING: any change you make to the file above will affect all virtual hosts on this Nginx server. If you need some of them to support older protocols, it’s better to just comment out that option in that file, and then include it in each virtual host’s server section.

EDIT: actually, it turns out that ssl_protocols affects the entire server, with the first option Nginx finds  (first in /etc/nginx.conf, then in the default website (which possibly includes /etc/letsencrypt/options-ssl-nginx.conf)) taking precedence. So just choose whether you want TLS 1.0 to 1.2 (maximum compatibility) or just 1.2 only (maximum security/rating); if you need both, use two separate servers.

Key Exchange:

We’ve already created the new certificate with a 4096-bit key (with “—rsa-key-size 4096“, see above), and according to SSL Labs’ docs this should be enough… but it isn’t. After some googling, I found out that you also need to add the following option inside the server section in Nginx:

ssl_ecdh_curve secp384r1;

Since the default Nginx+OpenSSL/LibreSSL setting, either “X25519” or “secp256r1” (actually “prime256v1“), also lowers the score.

EDIT: again, ssl_ecdh_curve affects the entire server, so you can’t use different default curves for each virtual host. So I’d suggest (in /etc/letsencrypt/options-ssl-nginx.conf):

ssl_ecdh_curve secp384r1:X25519:prime256v1;

if you want the 100% rating, or:

ssl_ecdh_curve X25519:prime256v1:secp384r1:

otherwise. This one doesn’t affect compatibility, by the way; it’s just a question of the preferred order.

The certificate’s key size (4096 or 2048) is, like the certificate itself, specific to each virtual host.

Cipher Strength:

For 100% here, you need to disable not only any old protocols, but also any 128-bit ciphers. I started from Mozilla’s SSL tool (with the “Modern” option selected), then removed anything with “128” in its name, then moved ChaCha20 to the front just because, and ended up with this line, which I added to /etc/letsencrypt/options-ssl-nginx.conf (replacing the current setting with the same name):

ssl_ciphers 'ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384::ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384';

(This time, this setting can indeed be specified for each virtual host, though you’d need to comment it out in the file above (which affects all virtual hosts with Let’s Encrypt certificates) if you want to do so, otherwise they’ll conflict.)

The result:

100% on SSL Labs

As said near the beginning, this is not something you likely want to do (yet) for a production, world-accessible site, as it will require relatively modern browsers, and you typically can’t control what visitors use1. According to SSL Labs’ list, it’s not actually that bad: all versions of Chrome, Firefox, or Safari from the past couple of years are fine, but no Microsoft browser older than IE11 will work, nor will Android’s default browser before 7.0 (Chrome on Android, which is not the same thing, will do fine.) I’d suggest it for a site where you can “control” the users, such as a small or medium-sized company’s webmail or employee portal (where you, as a sysadmin, can and should demand up-to-date security from your users).

But the main point of this exercise was, of course, to see if I could do it. Challenging yourself is always good. 🙂 And if you can share what you learned with others, so much the better.

Posted on

How to configure TLS encryption in Dovecot

DovecotAs with most other internet services, Dovecot can be configured to use TLS encryption — and, unlike some others (such as web servers or SMTP servers), there’s little reason not to enforce it.

Notes:

  • Like other recent TLS tutorials on this blog, this is, of course, not a full Dovecot guide — that would be far too complex for a blog post. Instead, it’s just focused on enabling/configuring TLS encryption. I’ll be assuming you already have Dovecot configured, and are able to access mailboxes on your server using an email client.
  • I’ll be focusing on IMAP only, not POP3 or anything else.
  • The server will be configured to require encryption, for both privacy and security reasons. I don’t know of any modern email client that doesn’t allow encrypted connections (and even then, you might work around it by configuring an encrypted tunnel, but that falls out of this post’s scope).

1. Getting a certificate

While I believe most modern email clients will support ECDSA certificates, such clients are not a known quantity like, say, web browsers are, so I suggest that you create an RSA certificate, unless you already have one whose Common Name (CN) matches your server’s public name (e.g. mail.domain.com). Dovecot versions 2.2.31 and newer support configuring alternative certificates so that you could support both kinds at the same time, but there’s probably little gain in doing that, since most clients will likely default to RSA anyway (and, unless you’re using Let’s Encrypt, certificates are not free).

So, put your certificate and private key in /etc/dovecot/. Let’s assume the certificate is called myserver-full.crt 1, and the private key is myserver.key. You should protect the private key from any users on your server, so do, for instance,

chown root:dovecot /etc/dovecot/myserver.key
chmod 640 /etc/dovecot/myserver.key

2. Configuring Dovecot for TLS

I’m assuming your Dovecot installation has a basic configuration file in /etc/dovecot/dovecot.conf, but the real “meat” of the configuration is in included files in /etc/dovecot/conf.d/. Your system may be slightly different, but I’m sure you can adapt. 🙂 Also, the numbers at the beginning of the file names may differ in your system.

This one isn’t really related to TLS, but it’s a good idea: edit /etc/dovecot/conf.d/20-imap.conf, and look for a line like this:

mail_plugins = $mail_plugins

and add to it (separated by a space):

imap_zlib

After all, there’s no reason not to use compression here, and bandwidth (especially on mobile) is still precious.

Now, edit /etc/dovecot/conf.d/10-ssl.conf, and add 2:

ssl = required
ssl_cert = </etc/dovecot/myserver-full.crt
ssl_key = </etc/dovecot/myserver.key
ssl_cipher_list = ECDHE-RSA-CHACHA20-POLY1305:ALL:!LOW:!SSLv2:!EXP:!aNULL
ssl_protocols = !SSLv2 !SSLv3
ssl_prefer_server_ciphers = yes

(The ssl_cipher_list line, besides setting secure defaults, sets the ChaCha20 protocol as the first one to be tried, since it’s considered one of the fastest and most secure. Note that it’ll require Dovecot linked to LibreSSL or OpenSSL 1.1.x to use that cipher, though Dovecot won’t complain if it doesn’t have access to it; it’ll just use the normal, secure defaults.)

If you don’t change anything else from the default configuration, the server will be listening on port 143 (IMAP) and port 993 (IMAPS). “But,” you ask, “isn’t standard IMAP unencrypted? I thought you were enforcing encryption…” Yes, but the standard IMAP port can be “upgraded” to TLS by entering the STARTTLS command, and email clients not only support that, but typically default to it (if not, just make sure you enable it). The server will refuse to authenticate any users on port 143 before they’ve “STARTTLSed”.

If you wanted to use only IMAP+STARTTLS, or only IMAPS, just edit /etc/dovecot/conf.d/10-master.conf,  look for the “service” configuration, and disable the one you don’t want. But I see no problem with keeping both enabled.

Thoughts? Questions?

(To do the same to SMTP / Postfix, please see How to configure TLS encryption in Postfix.)

Posted on

How to create an RSA certificate

Whether it’s a web server, an email server (two, in fact, assuming you’re using one for SMTP and another for IMAP, as is common), or other types of applications, to have encrypted connections a TLS certificate 1 is required. It can be self-signed (say, if you’ll be the only one needing to access that server), but browsers and email clients will complain (loudly!), therefore, if you want your server to be universally accessed, a “real” certificate is needed, so let’s show how to get one.

This recipe creates an RSA certificate (strongly suggested for, say, Postfix, since you can’t control what other email servers support, so you should go for the most common option); for web servers (accessed by standard browsers), an ECDSA certificate might be a good alternative.

A few notes:

  • There are alternatives (e.g. key sizes, etc.) for basically every parameter I’m using, but I’m not going into those. This is supposed to be as quick and easy as possible, after all.
  • Similarly, I’m not going into Let’s Encrypt; instead, I’m assuming a “normal” certificate authority such as Comodo. If you do use Let’s Encrypt, just use it to create the certificate instead of the “send the CSR to the certification authority” part.
  • The certificate (and server) will be compatible with most browsers and applications (email clients, etc.), but that “most” won’t include any Microsoft browsers on Windows XP (Firefox or Chrome on that abomination of an OS will still work).

Generating the key and the Certificate Signing Request (CSR):

openssl req -nodes -newkey rsa:4096 -keyout myserver.key -out myserver.csr

The command will ask you for details about your server/company (location, etc.). You should fill in every field, although the only mandatory one is “Common Name” (CN), which must match your server’s public name (not necessarily the machine’s name, but the hostname people will type in the browser/email client, such as “zurgl.com” or “mail.something.com“. Note that a certificate for “domain.com” also includes “www.domain.com” (so don’t include the “www.” in the CN), but if the server is reached at “subdomain.domain.com“, then that’s what the CN needs to be.

Ordering and receiving the new certificate:

Now go to a certification authority (CA), order a new certificate, and when asked for a CSR, send them (usually you can just copy and paste it into a text entry window) that myserver.csr file.

If everything went well, then the CA should email you the new certificate in a short while. Typically they send you two files: the certificate itself, and a couple of “intermediate” certificates. Only the first is really needed, but I’ve had best results with concatenating your certificate (first) and the intermediate certs (last) into a single file, which you might call myserver-full.crt .

That file is, to all intents and purposes, your new certificate, and it’s ready to be used in application servers. You can use the same certificate for several services (e.g. an HTTPS website, an SMTP server, an IMAP server), as long as the hostname matches the certificate’s CN (so a certificate for “mail.myserver.com” won’t work for “www.myserver.com“, and vice-versa, but that’s because the names don’t match — not because they’re different services).

Adding TLS encryption (with your shiny new certificate) to internet services:

Here’s a (growing) list of tutorials:

(Note: most of this post’s content originally appeared in a previous one.  The difference is that that one refers to ECDSA certificates, while this one is about the older, more common RSA certificates.)

Posted on

How to configure TLS encryption in Postfix

Although Postfix (and the SMTP protocol in general) can function without any kind of encryption, enabling TLS it can be a good idea in terms of both security and privacy, so let’s look at how it can be easily done.

We’ll actually be configuring two separate types of encryption:

  • Opportunistic encryption for regular SMTP (port 25), both incoming 1 and outgoing 2. “Opportunistic”, here, means that the server will ask for encryption and use it if the other side also supports it, but if it doesn’t then it’ll work without encryption. Although forcing it might sound tempting for security reasons, in reality many “smaller” servers around the world still don’t support it, so you would be unable to send or receive mail to/from those. Opportunistic TLS at least means that most “big” email services (e.g. Gmail) will communicate with you (and you with them) with encryption.
  • Mandatory encryption for the submission service (port 587). This is used by your own users (even if it’s just you) to send mail through your server, and typically has different restrictions (e.g. it’s authenticated, but on the other hand it can be used to send mail to the outside (unlike incoming port 25 which doesn’t, as that would make it an open relay)). Both the users’ authentication that would otherwise be in clear text, and the fact that only a limited number of users (your users, too) will be accessing that port through email clients (never other email servers that you don’t control) make forcing encryption here a no-brainer.

NOTE: naturally, this is not an exhaustive Postfix tutorial. I’ll be assuming you already have a working server, and just want to add TLS encryption to it. Also, some parts may not apply to your case.

1. Have/get a TLS certificate for your email host’s public name

If you don’t already have one, see how to create a new TLS certificate. We’ll be using an RSA certificate here (instead of going with ECDSA) since unlike, say, a web server accessed by standard browsers, you can’t control what other email servers support 3, therefore it’s best to choose the most common option. 4

Note that the certificate’s CN must match your email host’s public name (e.g. “mail.domain.com“). That will also probably correspond to (one of) the domain’s MX records.

2. Postfix configuration

Again, I’ll be assuming your non-TLS Postfix is already working fine.

Put your certificate and key in /etc/postfix (for instance). For this example, I’ll be calling them myserver-full.crt and myserver.key.

In /etc/postfix/main.cf, add the following lines:

# TLS configuration starts here

tls_random_source = dev:/dev/urandom

# openssl_path=/usr/local/libressl/bin/openssl
# uncomment and edit the above if you're using a different "openssl" than the system's
# (in this case, LibreSSL)

# SMTP from your server to others
smtp_tls_key_file = /etc/postfix/myserver.key
smtp_tls_cert_file = /etc/postfix/myserver-full.crt
smtp_tls_CAfile = /etc/postfix/myserver-full.crt
smtp_tls_security_level = may
smtp_tls_note_starttls_offer = yes
smtp_tls_mandatory_protocols=!SSLv2,!SSLv3
smtp_tls_protocols=!SSLv2,!SSLv3
smtp_tls_loglevel = 1
smtp_tls_session_cache_database =
    btree:/var/lib/postfix/smtp_tls_session_cache

# SMTP from other servers to yours
smtpd_tls_key_file = /etc/postfix/myserver.key
smtpd_tls_cert_file = /etc/postfix/myserver-full.crt
smtpd_tls_CAfile = /etc/postfix/myserver-full.crt
smtpd_tls_security_level = may
smtpd_tls_auth_only = yes
smtpd_tls_mandatory_protocols=!SSLv2,!SSLv3
smtpd_tls_protocols=!SSLv2,!SSLv3
smtpd_tls_loglevel = 1
smtpd_tls_session_cache_database =
    btree:/var/lib/postfix/smtpd_tls_session_cache

# TLS configuration ends here

And in /etc/postfix/master.cf, assuming you already have a “submission” section a bit like this:

submission  inet  n     -       n       -       -       smtpd
    -o smtpd_etrn_restrictions=reject
    -o smtpd_sasl_auth_enable=yes
    -o smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,reject
    -o smtpd_client_restrictions=permit_mynetworks,permit_sasl_authenticated,reject
    -o smtpd_helo_restrictions=permit_mynetworks,permit

Add to that section:

  -o smtpd_tls_security_level=encrypt

The above forces encryption for the submission service (remember that it’s not required for normal SMTP, it’s just desired).

In short:

  • your server tries to connect to others using TLS, but falls back to an unencrypted connection if the other side doesn’t support encryption;
  • other servers can connect to yours using TLS, but if they don’t attempt it then the connection will be unencrypted;
  • your users *must* use encryption (and authentication) to send mail through your server.

Restart your server, and check the logs: you should be getting mentions of TLS now. For instance, an email server starting an encrypted connection to yours looks like:

Sep 6 14:25:58 drax postfix/smtpd[22727]: Anonymous TLS connection established from lists.openbsd.org[192.43.244.163]: TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)

Questions? Suggestions?

(And what about securing mailbox access? Enjoy: How to configure TLS encryption in Dovecot)

Posted on

How to create an ECDSA certificate

Whether it’s a web server, an email server (two, in fact, assuming you’re using one for SMTP and another for IMAP, as is common), or other types of applications, to have encrypted connections a TLS certificate 1 is required. It can be self-signed (say, if you’ll be the only one needing to access that server), but browsers and email clients will complain (loudly!), therefore, if you want your server to be universally accessed, a “real” certificate is needed, so let’s show how to get one.

In this tutorial, I’ll be creating an ECDSA certificate with an EC key, instead of the more usual RSA type; ECDSA is more modern and is theoretically more secure even with smaller keys. If you need an RSA certificate (which I’d recommend for Postfix, for instance, since you can’t control what other email servers around the world support, so, you should go for the most common option; for web servers, ECDSA is fine), see How to create an RSA certificate.

A few notes:

  • There are alternatives (e.g. key sizes, etc.) for basically every parameter I’m using, but I’m not going into those. This is supposed to be as quick and easy as possible, after all.
  • Similarly, I’m not going into Let’s Encrypt; instead, I’m assuming a “normal” certificate authority such as Comodo (which supports ECDSA certificates; if you choose another, you should make sure of that in advance). If you do use Let’s Encrypt, just use it to create the certificate instead of the “send the CSR to the certification authority” part.
  • The certificate (and server) will be compatible with most browsers and applications (email clients, etc.), but that “most” won’t include any Microsoft browsers on Windows XP (Firefox or Chrome on that abomination of an OS will still work).

Generating the key and the Certificate Signing Request (CSR):

openssl ecparam -genkey -name secp384r1 | openssl ec -out myserver.key

openssl req -new -key myserver.key -out myserver.csr

The second command will ask you for details about your server/company (location, etc.). You should fill in every field, although the only mandatory one is “Common Name” (CN), which must match your server’s public name (not necessarily the machine’s name, but the hostname people will type in the browser/email client, such as “zurgl.com” or “mail.something.com“. Note that a certificate for “domain.com” also includes “www.domain.com” (so don’t include the “www.” in the CN), but if the server is reached at “subdomain.domain.com“, then that’s what the CN needs to be.

Ordering and receiving the new certificate:

Now go to a certification authority (CA), order a new certificate, and when asked for a CSR, send them (usually you can just copy and paste it to a text entry window) that myserver.csr file.

If everything went well, then the CA should email you the new certificate in a short while. Typically they send you two files: the certificate itself, and a couple of “intermediate” certificates. Only the first is really needed, but I’ve had best results with concatenating your certificate (first) and the intermediate certs (last) into a single file, which you might call myserver-full.crt .

That file is, to all intents and purposes, your new certificate, and it’s ready to be used in application servers. You can use the same certificate for several services (e.g. an HTTPS website, an SMTP server, an IMAP server), as long as the hostname matches the certificate’s CN (so a certificate for “mail.myserver.com” won’t work for “www.myserver.com“, and vice-versa, but that’s because the names don’t match — not because they’re different services).

Adding TLS encryption (with your shiny new certificate) to internet services:

Here’s a (growing) list of tutorials:

(Note: most of this post’s content originally appeared in a previous one.  The reason for its creation is that I’m planning several other TLS-related posts where a certificate will be required and, to avoid repeating the “how to create a certificate” instructions in every single one of them, I’d rather have this post to link to when needed.)

Posted on

How to set up an Nginx HTTPS website with an ECDSA certificate (and get an A+ rating on SSL Labs)

Most people who maintain web servers (or email servers, or…) have probably had to deal with SSL/TLS certificates in the past, but the process is, in my opinion, typically more complex than it should be, and not that well documented, typically forcing the user to consult several tutorials on the web so that they can adapt parts of each for their needs. Since I had to renew a couple of certificates last week, I thought about writing a quick and easy tutorial for a particular case: HTTPS on Nginx (although the certificate itself could, of course, be used for other services; right now I have one I’m using for IMAP (Dovecot) and SMTP (Postfix) as well). For extra fun, I’ll be creating/using an ECDSA certificate with an EC key, instead of the more usual RSA type; ECDSA is more modern and is theoretically more secure even with smaller keys.

A few notes:

  • There are alternatives (e.g. key sizes, etc.) for basically every parameter I’m using, but I’m not going into those. This is supposed to be as quick and easy as possible, after all.
  • Similarly, I’m not going into Let’s Encrypt; instead, I’m assuming a “normal” certificate authority such as Comodo (which supports ECDSA certificates; if you choose another, you should make sure of that in advance). If you do use Let’s Encrypt, just use it to create the certificate instead of the “send the CSR to the certification authority” part.
  • The certificate (and server) will be compatible with most browsers, but that “most” won’t include any Microsoft browsers on Windows XP (Firefox or Chrome on that abomination of an OS will still work).
  • If you already have a certificate (whether ECDSA or not, whether from Let’s Encrypt or not) and you’re here just for the A+ rating on SSL Labs, skip to “Setting up Nginx” below.

Generating the key and the Certificate Signing Request (CSR):

openssl ecparam -genkey -name secp384r1 | openssl ec -out myserver.key

openssl req -new -key myserver.key -out myserver.csr

The second command will ask you for details about your server/company (location, etc.). You should fill in every field, although the only mandatory one is “Common Name” (CN), which must match your server’s public name (not necessarily the machine’s name, but the host name people will type in the browser, such as “zurgl.com“. Note that a certificate for “domain.com” also includes “www.domain.com” (so don’t include the “www.” in the CN), but if the server is reached at “subdomain.domain.com“, then that’s what the CN needs to be.

Ordering and receiving the new certificate:

Now go to a certification authority (CA), order a new certificate, and when asked for a CSR, send them (usually you can just copy and paste it to a text entry window) that myserver.csr file.

If everything went well, then the CA should email you the new certificate in a short while. Typically they send you two files: the certificate itself, and a couple of “intermediate” certificates. Only the first is really needed, but I’ve had best results with concatenating your certificate (first) and the intermediate certs (last) into a single file, which you might call myserver-full.crt . Put it somewhere Nginx can access (e.g. /etc/nginx), and also the key you generated earlier (in this example, myserver.key). You don’t need the CSR there, by the way; it was just needed for ordering the new certificate.

Setting up Nginx:

This is, of course, not a complete Nginx tutorial (that would take a lot more space than a single post), just a simple recipe for configuring an HTTPS site with your new certificate, and have it be secure (and get a great score at SSL Labs, too). I’m assuming you can take care of all the non-HTTPS bits.

So, inside a virtual host, you need the server section:

server {
        listen 443 ssl http2; # if your nginx complains about 'http2', remove it, or (better yet) upgrade to a recent version
        server_name mysite.com # replace with your site, obviously

        # all the non-HTTPS bits (directories, log paths, etc.) go here

        # the rest of the recipe -- see below -- can go here
}

See the last comment? OK, let’s begin adding stuff there (I won’t indent any configuration lines from now on, but they look better if aligned with the rest of the configuration inside the { } ).

ssl_certificate /etc/nginx/myserver-full.crt; # the certificate and the intermediate certs, as seen above...
ssl_certificate_key /etc/nginx/myserver.key; # ... and the key

ssl_protocols TLSv1 TLSv1.1 TLSv1.2;

ssl_ciphers 'ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS:!3DES';
# the above comes from Mozilla's Server Side TLS guide

add_header X-Content-Type-Options nosniff;
ssl_session_cache shared:SSL:10m;
ssl_session_timeout 5m;	# basic defaults.

Great, you now have a basic HTTPS server! I suggest you try it now: save the configuration, restart Nginx, and test it. Access the URL with a browser (and check if the browser doesn’t complain about the certificate: if it did, something went wrong), and run it through SSL Labs’ Server Test. Check if it complains about something; if so, something needs fixing (ask in the comments, maybe I or someone else can help).

If all went well, you probably got a decent score, maybe even an A. But how to get an A+, like I promised at the beginning?

An A+ score on SSL Labs’ Server Test:

As of now (September 2017), SSL Labs only asks for one more thing: “HTTP Strict Transport Security (HSTS) with long duration”. HSTS is a mechanism to tell browsers: “this site should be accessed through HTTPS only; if you attempt to connect through normal HTTP, then deny access”. This information is actually cached by the browser, it’s not the server that refuses HTTP connections (though it’s, of course, possible to configure Nginx to do just that — or simply do 301 redirects to the equivalent HTTPS URL. But I digress…). In short, it protects against downgrade attacks. As for the “with long duration” part, that’s simply the time that browsers should cache that information.

IMPORTANT: don’t proceed until you have the basic HTTPS site running, and SSL Labs reporting no problems (see the previous section)!

ALSO IMPORTANT: if you *do* want your site to be accessible through both HTTP and HTTPS, stop here, as the rest of the configuration will make it HTTPS-only! That means, however, giving up on the A+ score.

So, add the following:

add_header Strict-Transport-Security "max-age=63072000; includeSubdomains; preload";

Restart Nginx, try SSL Labs’ test again. Did you get an A+?

If not, or you have any questions, feel free to ask.

For extra fun: have your Nginx use LibreSSL or OpenSSL 1.1.x, and enjoy a few more modern ciphers (look for “ChaCha20” on SSL Labs) without any configuration changes from the above.

Proudly powered by WordPress